Shenzhen Bestgo Tech Co., Ltd.

Home Wireless Alarm with 99 wireless zones

Home Wireless Alarm with 99 wireless zones
Product Detailed

Intelligent wireless intruder alarm
Long alarm signal receiving
10 second record
99 wireless alarm zones,showed by LED

Multi modes optional for every zone home wireless alarm

Features:
99 Wireless zones alarm system
Multi modes optional: close mode, quick mode, delay mode, emergency mode, intelligent mode, dual-tech mode and multi-tech mode.
Anti malice interference function: If the main host detects any wireless interference,the siren will sound;
Anti-decoding function: all the wireless remote controllers can not disarm the alarm host;
6 groups of telephone No. for alarm calling
Arm/disarm by remote control or call;Mute/sound alarm optional;
It has the priority to occupy the telephone line to dial out the alarming phone;10seconds record.
Can independently program the zone modes and zones' alert sound;
The system has telephone line anti-cut alarm function;

 

Specification:
Power:DC 9V-12V , ≥500mA
Standby current :< 30mA
Alarming current :< 500mA
Radio Frequency: 315 MHz/433Mhz
Sensitivity: 5mV/m
Anti- interference: 1 V/m (frequency scope 20-1 KMHz)
Siren sound: 120dB
Working temperature: -10 +45
Relative humidity: ≤ 90%

 

Alarm Kit:
1pc-Alarm system (control unit)

1pc-Wireless PIR detector

1pc-Wireless door (gap) sensor

2pc-Remote controller

1pc-Mini wired siren 110dB/0.3m

1pc-Power adpater

1pc-User manual 

 

Home wireless alarm system installation skills:

1. Where to install? Select a good location for the alarm panels, sensors and indoor alarm siren. The best places are those that can easily be located by all family but that can not be seen by guests and outsiders. If wireless alarm host, you should install it nearby window where own good gsm signal. If PSTN alarm panel,you should connect it to landline.
 
2.Motion detectors and door sensors. After installation, you should test them. Pls try to move before wireless PIR detectors or open and close the door to test door sensor. To check if the alarm host could receive wireless alarm signal from detectors.
 
3. After installation,you could program your phone No into wireless alarm. And make it alarm, to check if you receive call or SMS.



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.